ECS-7000MF Fan Energy Saving Controller - Timely Response

Introduction to Building Equipment Monitoring System

The building equipment monitoring system conducts operational condition monitoring and automatic control based on set parameters for the following equipment systems to achieve convenient management, energy savings, and improved efficiency. This detailed plan is designed based on plumbing, heating, and electrical drawings.

ECS-7000MKT Fresh Air Unit Energy-Saving Controller

1 RS485 BACnet M protocol

1 LCD screen for displaying and setting parameters

1 set of signal indicators, manual/auto switch, and start/stop buttons

1 RS485 ModBus communication port for connecting to an electricity meter

6 AI, 7 DI, 4 AO, 4 DO

Operating voltage: DC 24V ±20%

ECS-7000MF Fan Energy-Saving Controller

Primarily used for energy-saving control of smoke exhaust and ventilation (supply air and makeup air). The controller collects data such as temperature, humidity, and CO from indoor and outdoor environments; controls fan operation; and can operate independently or networked.

1 RS485 BACnet M protocol

1 set of signal indicators, manual/auto switch, and start/stop buttons

1 RS485 ModBus communication port for connecting sensors

6 AI, 7 DI, 4 AO, 4 DO

Operating voltage: DC 24V ±20%

For more product information or pricing, please call our company.

Product inquiry phone: 152-0290-6680

Please contact Manager Zhang: 152 0290 6680 (same as WeChat)

We are dedicated to providing project drawing design optimization and configuration plan quotations!!!

ECS-7000MKT Air Conditioning Energy-Saving Controller

Primarily used for comfort and energy-saving control at the terminal of central air conditioning systems. The controller collects data such as temperature, humidity, and CO2 from ducts and indoor/outdoor environments; interlinks fan start/stop; adjusts water valve opening angle; regulates the operating frequency of variable frequency air conditioning units; controls damper opening/closing; adjusts fresh/return air valve opening angle; and can operate independently or networked.

1 RS485 BACnet M protocol

1 LCD screen for displaying and setting parameters

1 set of signal indicators, manual/auto switch, and start/stop buttons

1 RS485 ModBus communication port for connecting to an electricity meter

6 AI, 7 DI, 4 AO, 4 DO

Operating voltage: DC 24V ±20%

ECS-7000MU Elevator Energy-Saving Controller

Primarily used for monitoring elevators and escalators. The module collects statuses such as elevator up, down, fault, and floor stop; and can operate independently or networked.

1 RS485 BACnet M protocol

1 RS485 ModBus communication port for connecting to the elevator control cabinet

4 analog input points

10 digital input points

4 digital output points (transistor output) 

2 analog output points outputting DC 0…10V signals

Operating voltage: AC/DC 24V ±20%